English
简体中文
Русский язык
Français
日本語
한국어
Português
Español
Website navigation
Position:
Leave A Message
E-mail:
Tell:
Whatapp:
Address:Room 1505, Building 9, No. 26 Dongqing Street, Zhengzhou High-tech Industrial Development Zone
Tel Number
180-3717-8440
A brief description: The small rotary furnace is mainly used for the mixed burning of powder. There are 4 lifting plates welded inside the furnace tube. The furnace tube can be rotated 360° when the instrument is running, which can increase the uniformity of powder sintering, so it is especially suitable for the sintering of lithium battery materials. Such as LiFePO4,LiMnNiO4 etc.
Main application:
Small rotary tube furnace is mainly used for the mixed firing of powders. There are 4 lifting plates welded inside the furnace tube. The furnace tube can be rotated 360° when the instrument is running, which can increase the uniformity of powder sintering, so it is particularly suitable Sintering of lithium battery materials, such as LiFePO4, LiMnNiO4, etc.
Product introduction:
This furnace is a CE-certified inclined rotary tube furnace designed for uniform sintering of powder at high temperature; the temperature control system is adjusted by PID, and 30 steps of temperature rise and fall programs can be set, using K The type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃, and it can be equipped with a precision gasification device.
Technical Parameters:
Main application:
Small rotary tube furnace is mainly used for the mixed firing of powders. There are 4 lifting plates welded inside the furnace tube. The furnace tube can be rotated 360° when the instrument is running, which can increase the uniformity of powder sintering, so it is particularly suitable Sintering of lithium battery materials, such as LiFePO4, LiMnNiO4, etc.
Product introduction:
This furnace is a CE-certified inclined rotary tube furnace designed for uniform sintering of powder at high temperature; the temperature control system is adjusted by PID, and 30 steps of temperature rise and fall programs can be set, using K The type thermocouple is used for temperature measurement and control, and its temperature control accuracy can reach +/- 1℃, and it can be equipped with a precision gasification device.
Technical Parameters:
| product name | Small rotary tube furnace |
| Shell structure | Double shell with air cooling system |
| Furnace material | Furnace uses alumina polycrystalline fiber |
| Furnace tube size approximately | Diameters of 50, 60, 80, 100, 120, 150, 200mm are optional |
| Heating zone | 200, 300, 400mm optional |
| Furnace tube material | Quartz furnace tube |
| Operating temperature | 1100°C |
| Maximum temperature | 1200°C |
| Temperature control method | Intelligent 30-segment PID programmable control, with over-temperature and burnout protection functions |
| Flange joint | Equipped with two stainless steel vacuum flanges, mechanical pressure gauge has been installed |
| Sealing system | The furnace tube and flange are extruded and sealed with a silicone O-ring, which is convenient for disassembly and assembly, repeatable disassembly and assembly, and good airtightness. Vacuum and atmosphere can be evacuated during rotation. |
| Heating rate | 0-10℃/min |
| Heating element | Resistance wire |
| Operating Voltage | AC 220/380V 50Hz |
| Temperature measuring element | K-type thermocouple |
| Vacuum | Pre-evacuated to -0.1MPa (value of vacuum pressure gauge) |
| Accessible atmosphere | Inert gas (slightly positive pressure) |
| Gasification device | Accurate gasification device can be installed as needed |
| Provide related accessories | Crucible tongs, high temperature gloves, thermocouple, furnace plug, manual, warranty card, etc. |
| After-sales service | 12-month warranty and lifetime warranty (except vulnerable parts) |
| More specifications can be customized according to requirements | |
